Stand out features
3kW High-Speed Burner
The 3kW high-speed burner delivers rapid heat to get you cooking faster and is perfect for searing steaks or rapid boiling.
Continuous Cast-Iron Finish Pan Supports
For maximum stability while cooking the cast iron pan stands are continuous allowing you to transfer pans from burner to burner easily.
Front Mounted Controls
The ergonomic control knobs come with a raised center allowing for precise adjustments with a simple turn of the knob and with integrated ignition via the controls dials.
Black Tempered Glass Surface
The seamless, one-piece tempered black glass design makes cleaning simple and the cast iron pan stands can be removed to allow you to easily wipe clean the hob surface.
Key Features
- Semi-continuous cast-iron pan support: for high stability and easy cleaning.
- Biomethane-ready: your gas hob can also be powered with renewable biomethane gas.
- Ergonomic control knobs with raised center for precise adjustments.
- Standard and semi-flush built-in option: choose between flush or surface-mounted installation.
Design
- Tempered glass surface, Black
- Frameless design: install the hob either flush or slightly raised on the worktop
- Cast iron pan supports with rubber feet
Usage convenience
- Design coordinated control dials: easily access dials in front with a strong grip for effortless turning.
- Ignition via control dials: just push and turn the dials to ignite the flame.
Burners and power
- 4 gas burners:
- Left front: Standard burner up to 1.75 KW (depending on gas type)
- Left rear: Standard burner up to 1.75 KW (depending on gas type)
- Right rear: High-speed burner up to 3 KW (depending on gas type)
- Right front: Economy burner up to 1 KW (depending on gas type)
Safety
- Flame failure safety device: prevents unwanted gas flow when flame goes out.
Installation (gas types & measurements)
- Pre-set for natural gas L/LL G25/20mbar(DE)
- Nozzle set for LPG jets included. Connection to 28-30/37 mbar bottled gas.
- Dimensions of the product (HxWxD mm): 56 x 590 x 520
- Required niche size for installation (HxWxD mm): 45 x 560 x (480-492)
- Min. worktop thickness: 30 mm
- Power cord: 1 m
- Connected load: 7.5 KW
