Grade A1 - Good condition with hard to spot minor blemishes
6 Month Warranty
Enjoy the peace of mind that your product is covered with a guarantee on both parts and labour.
Fully working
Our expert engineers rigorously test and check every product to ensure everything functions as it should.
What's included
All accessories are included unless otherwise stated in the description below.
Limited stock
Our refurbished products sell out quickly, so be quick and get a fantastic product at a fraction of the new price.
The ECP102SS is a 100cm wide chimney hood in stainless steel with a curved glass canopy from CDA.
This model has 3 speeds selected by push button controls and aluminium grease filters. There are two 20 Watt halogen lights to illuminate your hob. The motor gives you a good extraction rate of 391 cubic metres per hour, which is ideal for kitchens up to 47 cubic metres, and a relatively low noise level at 60 decibels.
As a wall-mounted extractor the ECP102SS can be installed to re-circulate the air into the kitchen or to be ducted outside. If you are choosing to re-circulate you'll need a charcoal filter and if you're ducting out you'll need a ducting kit.
Features
- Ducted or recirculating modes
- 3 speeds
- Push button control
- Aluminium grease filter
- 2 x 20 W halogen lights
Technical Specifications
- Required height over gas hob: 700 mm (min)
- Required height over electric hob: 600 mm (min)
- Outlet diameter: 150 mm
- Noise level: 61 dBA
- Extraction rate: 391 m³/hr
- Rated electrical power: 200 W
- Power supply required: 3 amps
Fitting note: Please ensure that you check the ceiling height is sufficient to allow the required clearance between the hob and extractor
What's In The Box?
Includes all standard paperwork.
Due to glass manufacturing process the width of the glass canopy may be variable by up to 10mm
